Statler: Belts

Cleaning the Belt Pulley

How to check and clean the belt pulley on a computerized Gammill.

Dropping the Belts

Dropping or disengaging the belts on the Statler or Elevate machine will allow the user to handguide the machine with ease. There are two belts to disengage.

Turn the T screw counter-clockwise
Remove the belt connector from the insert.
Pull the belt until the connector is out of the way of stitching.
Repeat the process with the second belt. To reengage the belts, replace the connector and tighten the T screw.