Alert Over Speed 
When the stitches per inch are set at a high number, and the head is moved quickly, it is possible that the required motor speed would be higher than can be maintained for an even stitch. If this situation occurs, an alert message: Over Speed will appear on the screen. If this appears, long stitches could result. Setting a lower stitches per inch setting, slowing movements, or both will prevent this. If the message continues to occur, further troubleshooting instructions are available in the Vision 2.0 Service Manual.
Connection
The Vision™ 2.0 Application communicates to the quilting system using Bluetooth. When connected, the text will read “Connected to Gammill Vision2-XXXX” where XXXX is the last 4 digits of the address of the system it is connected to.
If the application is not connected to a system, it will read “Disconnected”. If this is the case, communication needs to be established. See the section on Bluetooth Connection for additional information on how to connect the tablet to the system.
